Skip to main content
Infineon Technologies BTS452RAKSA1 — Power Management (PMIC / Gate Driver)
Infineon Technologies

BTS452RAKSA1 Infineon miniPROFET High-Side Switch, 1.8A

MPNBTS452RAKSA1
Active

Infineon Automotive AEC-Q100 miniPROFET® BTS452RAKSA1, single-channel high-side power switch, 1.8A max output, 150mOhm typical Rds(on), 6V to 52V load voltage, PG-TO252-5-11 package, -40°C to 150°C junction temperature.

$2.6400Ref. price · indicative, final on quote
BTS452RAKSA1 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BTS452RAKSA1 Technical Specifications
ParameterValue
SeriesAutomotive, AEC-Q100, miniPROFET®
Input typeNon-Inverting
Output typeN-Channel
Switch typeGeneral Purpose
Mounting typeSurface Mount
Voltage - load6V ~ 52V
Voltage - supply (Vcc (Vdd))Not Required
Current - output1.8A
Number of outputs1
InterfaceOn/Off
Operating temperature-40°C~150°C(TJ)
PackageTube
FeaturesAuto Restart, Status Flag
Rds on150mOhm
CaseTO-252-5, DPak (4 Leads + Tab), TO-252AD
Fault protectionCurrent Limiting (Fixed), Over Temperature, Over Voltage
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

Single-channel high-side switch for 12V/24V/48V automotive loads

It integrates an N-channel MOSFET with a 150 mOhm typical on-resistance and delivers up to 1.8 A continuous output current across a 6 V to 52 V load voltage range. No external Vcc supply is needed — the switch is self-powered from the load rail.

Built-in fault protection eliminates external clamp and sense circuits

The BTS452RAKSA1 integrates current limiting (fixed threshold), over-temperature shutdown, and over-voltage protection. These features protect the switch and the load during short circuits, overloads, and load-dump transients without requiring external TVS diodes or current-sense resistors. A status flag output and auto-restart behaviour simplify fault recovery in the ECU firmware — the switch attempts to re-close after a thermal shutdown once the junction cools, reducing software overhead for lamp or solenoid loads.

PG-TO252-5 package with exposed tab for thermal management

The device is supplied in a PG-TO252-5-11 package (DPak with 4 leads plus tab), a surface-mount power package.

This makes it suitable for both new production builds and ongoing aftermarket support without requalification risk.

Frequently asked questions

Where can I buy the BTS452RAKSA1 and get a price quote?

Submit a request with your target quantity and we will confirm current availability and pricing at quote time.

Is BTS452RAKSA1 a replacement for BTS452R?

The evidence does not list an official cross-reference or successor relationship between BTS452RAKSA1 and BTS452R. Without a manufacturer-issued PCN or cross-reference, treat them as separate order codes — confirm pin compatibility and electrical ratings from the respective datasheets before substituting.

Does the BTS452RAKSA1 have overcurrent protection?

Yes, it integrates fixed current limiting, over-temperature shutdown, and over-voltage protection. The current limiting clamps the output current during a short circuit without latching off — the switch auto-restarts after a fault clears.

Can the BTS452RAKSA1 be used with 3.3V logic?

Yes.