Skip to main content
Infineon Technologies BTS410F2 E3062A — Power Management (PMIC / Gate Driver)
Infineon Technologies

BTS410F2 E3062A PROFET High-Side Switch, 190mOhm, Obsolete

MPNBTS410F2 E3062A
Obsolete

Infineon PROFET® BTS410F2 E3062A, high-side power switch, 1 N-channel output, 190mOhm Rds(on) typ, 4.7V~42V load range, 1.6A max, PG-TO263-5-2, -40°C~150°C.

BTS410F2 E3062A datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BTS410F2 E3062A Technical Specifications
ParameterValue
SeriesPROFET®
Input typeNon-Inverting
Output typeN-Channel
Switch typeGeneral Purpose
Mounting typeSurface Mount
Voltage - load4.7V ~ 42V
Voltage - supply (Vcc (Vdd))Not Required
Current - output1.6A
Number of outputs1
InterfaceOn/Off
Operating temperature-40°C~150°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesAuto Restart, Status Flag
Rds on190mOhm
CaseTO-263-5, D²Pak (4 Leads + Tab), TO-263BB
Fault protectionCurrent Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

190mOhm high-side switch — what it delivers

The Infineon BTS410F2 E3062A is a single-channel PROFET high-side power switch in a PG-TO263-5-2 package. Its 190mOhm typical Rds(on) keeps conduction losses low for loads up to 1.6A continuous, and the 4.7V to 42V load voltage range covers 12V and 24V automotive and industrial rails.

Protection set and interface

The switch integrates current limiting (fixed), open-load detection, over-temperature shutdown, and over-voltage clamping — no external clamp diode needed for inductive loads. The input is non-inverting with a simple On/Off interface; no Vcc supply is required because the gate drive is self-biased from the load pin.

Obsolete — sourcing reality

Infineon lists the BTS410F2 E3062A as obsolete.

Frequently asked questions

What is the Rds(on) of the BTS410F2?

The typical Rds(on) is 190mOhm, specified at the nominal operating condition. This value sets the conduction loss floor — actual on-resistance will increase with junction temperature, so thermal design should account for the higher resistance at the 150°C maximum junction temperature.

What loads can the BTS410F2 E3062A drive?

It is a general-purpose high-side switch rated for 1.6A maximum continuous output current over a 4.7V to 42V load supply range. Typical applications include resistive, capacitive, and inductive loads such as relays, solenoids, lamps, and small motors in automotive body electronics and industrial controllers.