Skip to main content
Infineon Technologies BTS410E2E3062ANTMA1 — Power Management (PMIC / Gate Driver)
Infineon Technologies

BTS410E2E3062ANTMA1 Infineon PROFET High-Side Switch

MPNBTS410E2E3062ANTMA1
Active

Infineon PROFET series, BTS410E2E3062ANTMA1, high-side switch, 1 output, N-channel, 190 mOhm typ Rds(on), 4.7 V to 42 V load, 1.8 A max, -40°C to 150°C, PG-TO263-5-2 package, surface mount.

$5.6800Ref. price · indicative, final on quote
BTS410E2E3062ANTMA1 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BTS410E2E3062ANTMA1 Technical Specifications
ParameterValue
SeriesPROFET®
Input typeNon-Inverting
Output typeN-Channel
Switch typeGeneral Purpose
Mounting typeSurface Mount
Voltage - load4.7V ~ 42V
Voltage - supply (Vcc (Vdd))Not Required
Current - output1.8A
Number of outputs1
InterfaceOn/Off
Operating temperature-40°C~150°C(TJ)
PackageBulk
FeaturesAuto Restart, Slew Rate Controlled
Rds on190mOhm
CaseTO-263-5, D²Pak (4 Leads + Tab), TO-263BB
Fault protectionCurrent Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

PROFET high-side switch — 190 mOhm, 1.8 A, automotive grade

The Infineon BTS410E2E3062ANTMA1 is a single-channel PROFET high-side power switch in a PG-TO263-5-2 (D²Pak) surface-mount package. It switches a resistive or inductive load on the high side with a typical on-resistance of 190 mOhm, rated for a continuous output current of 1.8 A. The load supply range spans 4.7 V to 42 V, covering 12 V and 24 V automotive systems with margin for load-dump transients.

On-resistance and thermal budget

The 190 mOhm typical Rds(on) at 25°C sets the conduction loss floor.

Fault protection and diagnostics

Integrated fault protection covers current limiting (fixed), open-load detection, over-temperature, over-voltage, and undervoltage lockout. The auto-restart feature re-enables the output after a fault clears, which suits unmonitored loads like lamps or solenoids. The input is non-inverting with a simple On/Off interface — no Vcc supply pin is needed, so the switch is self-powered from the load supply.

Frequently asked questions

Is BTS410E2E3062ANTMA1 obsolete?

No — the product status is listed as active.

What is the typical application for BTS410E2E3062ANTMA1?

It is designed as a high-side switch for automotive loads such as lamps, solenoids, relays, and small motors in 12 V and 24 V systems. The wide temperature range and integrated protections suit under-hood and engine-bay environments.

Is BTS410E2E3062ANTMA1 compatible with 5V logic?

The input is non-inverting with a simple On/Off interface and does not require a separate Vcc supply. The logic threshold is referenced to the load supply voltage, so a 5 V logic signal may not reliably switch the part if the load supply is above 12 V — verify the input threshold levels in the datasheet against your logic voltage.