Analog Devices OP400GPZ, IC OPAMP GP 4 CIRCUIT 14DIP, General Purpose, 500 kHz GBW, 0.15 V/µs slew rate, 600 µA supply (x4), 6 V to 36 V supply, 14-PDIP, Tube, ROHS3.
| Parameter | Value |
|---|---|
| Output type | Differential |
| Mounting | Through Hole |
| Amplifier type | General Purpose |
| Voltage - input offset | 80 µV |
| Voltage - supply span | 36 V |
| Current - supply | 600µA (x4 Channels) |
| Current - input bias | 750 pA |
| Operating temperature | 0°C ~ 70°C |
| Gain bandwidth product | 500 kHz |
| Package | Tube |
| Slew rate | 0.15V/µs |
| Case | 14-DIP (0.300\", 7.62mm) |
| Number of circuits | 4 |
The OP400GPZ is a quad general-purpose operational amplifier from Analog Devices in a 14-lead PDIP package.
The 500 kHz gain-bandwidth product sets the usable closed-loop bandwidth.
The OP400GPZ comes in a 14-lead PDIP (0.300-inch body width) and mounts through-hole.
No official direct replacement is listed. The AD706JNZ is a dual general-purpose op-amp with similar 0.15 V/µs slew rate and 800 kHz GBW, but it provides only two channels versus the OP400GPZ's four. For a quad replacement, stay within the OP400 family.
The OP400GPZ uses a standard 14-lead PDIP package. Pin assignments follow the conventional quad op-amp layout: two amplifiers per side with the supply pins at the top and bottom corners. The exact pinout is shown in the datasheet.