Analog Devices MAX8792ETD+T, PWM Controller, 2V to 26V input, 4.5V to 5.5V supply, 700 µA supply current, -40°C to 85°C, 14-WFDFN Exposed Pad package, Surface Mount, Tape & Reel.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Voltage - input | 2V ~ 26V |
| Voltage | 4.5V ~ 5.5V |
| Current - supply | 700 µA |
| Operating temperature | -40°C ~ 85°C |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Applications | PWM Controller |
| Case | 14-WFDFN Exposed Pad |
That covers industrial control cabinets, outdoor telecom enclosures, and factory-floor equipment. Not rated for extended automotive under-hood, but fine for chassis or cabin-adjacent electronics if the ambient stays within the range.
ROHS3 compliant.
The MAX8792ETC+ is the same PWM controller in a TQFN package (5x5 mm) instead of the 3x3 mm TDFN. Electrical specs are identical, but the footprint and thermal pad differ — not pin-compatible without a board layout change.
Yes. The supply voltage range is 4.5V to 5.5V, so a 5V rail is right in the middle. No external regulator needed if you have a 5V bus available.