It monitors one voltage with a threshold of 2.625 V, asserts a reset output (active-low, push-pull/totem-pole) for a minimum of 140 ms after the supply rises above threshold, and then releases the processor to run. The 8-SOIC package is a common footprint that fits into existing PCB layouts without a board spin.
140 ms reset timeout — why that number matters
The reset timeout of 140 ms minimum gives the power supply time to settle and the crystal oscillator time to start up before the processor begins executing code.
Active-low reset with push-pull output
The reset output is active-low and push-pull (totem-pole), meaning it drives the reset line low during the timeout period and then releases it high without needing an external pull-up resistor. That simplifies the BOM — no extra resistor to the supply rail. The push-pull stage can sink and source enough current to drive the reset input of most logic families directly. If your processor expects an active-high reset, you would need an inverter; otherwise this is a direct connect.
The MAX690RESA+ comes in an 8-SOIC package (0.154" body width, 3.90 mm width) and is specified for surface-mount assembly. It ships in a tube, not tape-and-reel, so plan for tube-to-reel transfer if your pick-and-place line expects reels. The footprint is standard SOIC-8, compatible with most PCB layouts for this class of supervisor.