Skip to main content
Analog Devices MAX4174CAEUK — Logic ICs
Analog Devices

MAX4174CAEUK General Purpose Op-Amp, 2 MHz GBW

MPNMAX4174CAEUK
End of Life

Maxim Integrated MAX4174CAEUK, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 2 MHz Gain Bandwidth, 0.7 V/µs Slew Rate, 2.5 V to 5.5 V Supply, SOT-23-5, -40°C to 85°C.

$1.07Ref. price · indicative, final on quote
MAX4174CAEUK datasheet
PackagingSC-74A, SOT-753
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX4174CAEUK Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span5.5 V
Current - supply330µA
Current - input bias50 pA
Current - output (Channel)65 mA
Operating temperature-40°C ~ 85°C
-3db bandwidth230 kHz
Gain bandwidth product2 MHz
PackageBulk
Slew rate0.7V/µs
CaseSC-74A, SOT-753
Number of circuits1

Product details

What this op-amp brings to the bench

The Maxim Integrated MAX4174CAEUK is a single-supply, general-purpose op-amp in a SOT-23-5 package. It delivers a 2 MHz gain-bandwidth product and a 0.7 V/µs slew rate, with rail-to-rail output swing that keeps signal headroom at low supply voltages. Quiescent current is 330 µA per channel — moderate for the class, not the lowest-Iq option if you're counting microamps in a battery node.

It won't survive under-hood or downhole environments that need the 125°C extended range, but for the bulk of factory-floor and infrastructure boards it's a clean fit.

Lifecycle and sourcing posture

That means you can commit the BOM line without worrying about an imminent EOL. Note the RoHS non-compliant flag — if your assembly line requires RoHS-10/20 exemption documentation, factor that in at quote time.

Frequently asked questions

Is MAX4174CAEUK rail-to-rail output?

Yes, the output type is rail-to-rail, which means the output can swing within millivolts of both supply rails. This is useful for low-voltage signal chains where every millivolt of headroom matters, such as driving an ADC input or buffering a sensor output at 3.3 V.