Analog Devices MAX3001EAUP+, voltage level translator, bidirectional, 8-channel, auto-direction sensing, 4Mbps data rate, 1.2V–5.5V VCCA, 1.65V–5.5V VCCB, -40°C to +125°C, 20-TSSOP package, Tube.
| Parameter | Value |
|---|---|
| Output type | Tri-State, Non-Inverted |
| Channel type | Bidirectional |
| Mounting | Surface Mount |
| Translator type | Voltage Level |
| Voltage - VCCA | 1.2 V ~ 5.5 V |
| Voltage - VCCB | 1.65 V ~ 5.5 V |
| Operating temperature | -40°C ~ 125°C (TA) |
| Package | Tube |
| Features | Auto-Direction Sensing, Power-Supply Decoupling |
| Data rate | 4Mbps |
| Case | 20-TSSOP (0.173\", 4.40mm Width) |
| Number of circuits | 1 |
| Channels per circuit | 8 |
The MAX3001EAUP+ from Analog Devices is an 8-channel bidirectional voltage level translator in a 20-TSSOP package. It translates logic signals between two supply domains: VCCA from 1.2 V to 5.5 V and VCCB from 1.65 V to 5.5 V.
Auto-direction sensing means the MAX3001EAUP+ monitors the bus state on each channel and sets the drive direction accordingly. No DIR pin, no firmware toggling. The 4 Mbps data rate is the maximum.
Surface-mount only.
4 Mbps maximum. This handles I2C standard and fast modes, UART, and GPIO-level signals, but not high-speed SPI or parallel buses.
Functionally identical. The plus suffix indicates ROHS3 compliance (lead-free). The non-plus version (MAX3001EUP+) is the same die and package.
Yes. The auto-direction sensing and bidirectional channels are designed for open-drain buses like I2C and SMBus. The 4 Mbps data rate provides margin above the 400 kHz fast-mode I2C limit.
The MAX3001EUP+ (non-plus, non-ROHS) is the same die and may carry a different price. No other pin-compatible second source is documented in the available records.