Analog Devices MAX13431EETB+T, RS-422/RS-485 half-duplex transceiver, 16 Mbps data rate, 3V to 5.5V supply, -40°C to 85°C, 10-TDFN (3x3) package.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Voltage | 3V ~ 5.5V |
| Protocol | RS422, RS485 |
| Operating temperature | -40°C ~ 85°C |
| Duplex | Half |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Data rate | 16Mbps |
| Case | 10-WFDFN Exposed Pad |
| Receiver hysteresis | 15 mV |
| Number of drivers (Receivers) | 1/1 |
At 16 Mbps, this part keeps up with high-speed sensor arrays, encoder feedback, and multi-drop polling cycles.
The wide supply range lets the transceiver sit on a 3.3V microcontroller bus without a level shifter, or run directly from a 5V industrial rail.
The MAX13431EETB+T supports a data rate of 16 Mbps.
Stock levels vary; the part is available to order against an RFQ. Submit a quote request for current availability and lead time.
The MAX13431EETB+T and MAX13430EETB+T are both half-duplex RS-422/RS-485 transceivers; the key difference is that the MAX13431EETB+T offers a 16 Mbps data rate, while the MAX13430EETB+T is a lower-speed variant. Check the respective datasheets for full comparison.
Yes, the MAX13431EETB+T operates from a 3V to 5.5V supply, so it is compatible with 3.3V logic systems.