Analog Devices LTM2892CY-S#PBF — Digital Isolators
Technical Documents PDF / CAD
RoHS Compliant · Lead-Free EIA-481 Standard
Analog Devices / Digital Isolators

LTM2892CY-S#PBF SPI Digital Isolator, 3500Vrms, 6-Ch

MPN LTM2892CY-S#PBF
End of Life Spot Stock · 24-48h Dispatch 100% Original Sealed

Analog Devices LTM2892CY-S#PBF µModule SPI digital isolator, 3500Vrms, 6 unidirectional channels, 4MHz/8MHz data rate, 3V-5.5V supply, 24-BGA, 0°C to 70°C.

In Stock: 137 pcs
MOQ: 1 pcs
Logistics: DHL / FedEx DAP (Global Express · 3-7d) Russia & CIS DDP (Door-to-Door Cleared)
Dispatch: Shenzhen / HK
Unit Price (USD)
$14.87 / pc
Direct Purchase Ready
Volume Pricing Breaks Confirmed upon quotation
1+ pcs
$14.87
10+ pcs
$13.38
30+ pcs
$12.19
100+ pcs
$11.00
Working on a production BOM or have a target unit price? Submit Target Price
Buy Now

$14.87 / ea

137 in stock — maximum per order · 3–4 days lead time

$13.38 / ea from 10 pcs

Upload Full BOM List
[SPEC] Essential Parameters Snapshot Full Specifications (17)
Package / Case 24-BBGA
Supply Voltage 3V ~ 5.5V

Full Technical Specifications

17 Parameters
LTM2892CY-S#PBF specifications
Parameter / AttributeSpecification / Value
TypeSPI
SeriesµModule®
Channel typeUnidirectional
MountingSurface Mount
Supply voltage3V ~ 5.5V
Voltage - isolation3500Vrms
Isolated powerNo
Operating temperature0°C ~ 70°C
PackageTray
Data rate4MHz, 8MHz
TechnologyMagnetic Coupling
Case24-BBGA
Channels6
Inputs - side 1/Side 23/3
Rise (Fall time)3ns, 3ns
Propagation delay tpLH (tpHL)100ns, 100ns
Common mode transient immunity50kV/µs
Series Sibling Variants

Analog Devices µModule® Series Models

Sibling variants, package options, and speed/density grades in this Analog Devices semiconductor series. Active Shenzhen warehouse allocation and rapid 24-48h dispatch.

Technical Details & Description

The LTM2892CY-S#PBF is a 6-channel, unidirectional SPI digital isolator from the µModule family, using magnetic coupling to deliver 3500Vrms of galvanic isolation across a 3V to 5.5V supply range. It is designed for isolated SPI buses in industrial automation, motor drives, medical equipment, and any system where a noisy ground plane or safety isolation barrier must separate the controller from the peripheral. Six channels are split 3/3 between side 1 and side 2, matching the typical SPI signal set (SCK, MOSI, MISO plus three chip-select or control lines) without needing an extra isolator for the fourth wire. The unidirectional channel type means each signal path has a fixed direction — plan the layout so the controller side and peripheral side assignments match the PCB routing. Data rate is rated at both 4MHz and 8MHz. For SPI buses running at 4MHz or below, the part meets the timing with margin; at 8MHz the 100ns max propagation delay (tpLH/tpHL) becomes the limiting factor for clock-to-data setup on long traces. If your SPI clock exceeds 8MHz, this part will not close timing.

No isolated power — plan an external rail

The LTM2892CY-S#PBF does not include an integrated isolated DC-DC converter. Both sides of the isolation barrier need their own supply rails, each within 3V to 5.5V. For a 3.3V system, that means a separate isolated power module or a transformer-coupled flyback to generate the secondary-side rail. Factor that into the BOM cost and board area — the 24-BGA package itself is compact at 9x6.25mm, but the external power supply adds real estate.

Package, temperature grade, and storage

Housed in a 24-BBGA (9x6.25mm) surface-mount package, this is a BGA with a 1.0mm ball pitch typical of Analog Devices µModule isolators. Not rated for -40°C automotive or outdoor telecom enclosures. Rise and fall times are a typical 3ns each, which keeps edge-rate emissions manageable for a BGA layout.

If you are stocking for a multi-year production run, the active lifecycle means you can order in volume without chasing last-time-buy allocations.

Frequently asked questions

Does LTM2892CY-S#PBF require an external isolated power supply?

Yes. The part does not include an integrated isolated power converter. Each side of the isolation barrier needs its own 3V to 5.5V supply rail. Plan for an external isolated DC-DC module or a transformer-coupled supply on the secondary side.

Is LTM2892CY-S#PBF compatible with 3.3V systems?

Yes. The supply range is 3V to 5.5V, so 3.3V logic and power rails work directly. Both sides must be powered within that range — a 3.3V primary and a 3.3V or 5V secondary are both valid, as long as each side's supply stays inside the window.

What package does LTM2892CY-S#PBF come in?

It comes in a 24-BBGA (Ball Grid Array) package, supplier device package 24-BGA measuring 9x6.25mm.

LTM2892CY-S#PBF
Verified Allocation
Quote