Analog Devices LTC6226HS8#PBF, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 180V/µs Slew Rate, 420 MHz GBP, 8-SOIC, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 20 µV |
| Voltage - supply span | 11.75 V |
| Current - supply | 5.5mA |
| Current - input bias | 8.4 µA |
| Current - output (Channel) | 64 mA |
| Operating temperature | -40°C ~ 125°C |
| -3db bandwidth | 330 MHz |
| Gain bandwidth product | 420 MHz |
| Package | Tube |
| Slew rate | 180V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 1 |
The rail-to-rail output swings to within millivolts of each supply, which saves you a second gain stage when the ADC input range matches the supply rails.
It comes in an 8-SOIC package — surface-mount only, shipped in tube.
The package has no exposed pad — thermal dissipation goes through the leads and PCB copper.
For new designs this is a clean choice — no looming obsolescence risk.
The AD8027ARZ from Analog Devices is a single-supply, rail-to-rail output op-amp in the same 8-SOIC package, but its slew rate is 100 V/µs — roughly half the LTC6226's 180 V/µs. If the design's slew-rate requirement is lower, the AD8027ARZ can be a cost-effective alternative, but it is not a pin-for-pin replacement without checking the bandwidth and offset specs.