Skip to main content
Log in
Analog Devices ICL7611DCSA+ — Analog & Data Acquisition

ICL7611DCSA+ General Purpose Op-Amp, 1.4 MHz GBW, 8-SOIC

MPNICL7611DCSA+
End of Life

Maxim Integrated ICL7611DCSA+, general purpose amplifier, single circuit, 1.4 MHz gain bandwidth product, 1.6 V/µs slew rate, rail-to-rail output, 2 V to 16 V supply, 8-SOIC package, 0°C to 70°C.

$6.4Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ICL7611DCSA+ specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset15 mV
Voltage - supply span16 V
Current - supply1mA
Current - input bias1 pA
Operating temperature0°C ~ 70°C
Gain bandwidth product1.4 MHz
PackageTube
Slew rate1.6V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits1

Product details

A general-purpose op-amp that earns its keep on the lab bench and the BOM

The Maxim Integrated ICL7611DCSA+ is a single general-purpose CMOS op-amp in an 8-SOIC package.

The 1.4 MHz gain-bandwidth product sets the usable closed-loop gain bandwidth. The 1.6 V/µs slew rate limits the full-power bandwidth.

Package and footprint realities for the layout engineer

The ICL7611DCSA+ comes in an 8-SOIC package with a body width of 3.90 mm and a 0.154" pitch.

Lifecycle and sourcing — active, so no LTB clock ticking

Maxim Integrated lists the ICL7611DCSA+ as Active in production, with a ROHS3 compliance status. If you are populating a BOM for a production run or a repair batch, send an RFQ — we will confirm lead time and price against your quantity.

Frequently asked questions

What is the replacement or equivalent for ICL7611DCSA+?

Maxim has not designated an official replacement or successor for the ICL7611DCSA+. Several general-purpose CMOS op-amps in SOIC-8 from other manufacturers offer similar supply range and rail-to-rail output — check the pinout and compensation against your board before substitution. We can help identify a cross when you send an RFQ with your application requirements.