Skip to main content
Analog Devices AMP02EPZ — Memory (DRAM / SRAM / Flash / EEPROM)
Analog Devices

AMP02EPZ Instrumentation Amplifier, 6 V/µs Slew Rate, 8-DIP

MPNAMP02EPZ
End of Life

Analog Devices AMP02EPZ, Instrumentation Amplifier, 1 Circuit, 8-DIP (0.300", 7.62mm), Through Hole, Slew Rate 6 V/µs, -3 dB Bandwidth 1.2 MHz, Supply Span 9 V to 36 V, Industrial Temperature -40°C to 85°C.

$40.13Ref. price · indicative, final on quote
AMP02EPZ datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

AMP02EPZ Technical Specifications
ParameterValue
Mounting typeThrough Hole
Amplifier typeInstrumentation
Voltage - input offset20 µV
Voltage - supply span36 V
Current - supply5mA
Current - input bias2 nA
Current - output (Channel)32 mA
Operating temperature-40°C ~ 85°C
-3db bandwidth1.2 MHz
PackageTube
Slew rate6V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits1

Product details

What this part is and where it fits

The Analog Devices AMP02EPZ is a single-channel instrumentation amplifier in an 8-pin DIP package. It is designed to extract small differential signals in the presence of large common-mode voltages. The 20 µV input offset voltage and 2 nA input bias current keep DC errors low. Supply span runs from 9 V to 36 V.

Temperature grade and environment

Rated for -40°C to 85°C operating range — industrial temperature, not automotive. Suitable for outdoor telecom cabinets, factory automation panels, and instrumentation that lives in a climate-controlled room but sees cold starts. Not rated for under-hood or engine-bay deployment.

Lifecycle and sourcing posture

The AMP02EPZ carries an Active lifecycle status and is ROHS3 compliant. For dual-sourcing or a pin-compatible second source, the AD625KNZ is a functional peer — same instrumentation amplifier class, through-hole DIP, similar supply range — though its input offset is 25 µV and bandwidth is wider at 25 MHz.

Frequently asked questions

What is the equivalent of the AMP02EPZ?

The AD625KNZ is a close functional equivalent — also an instrumentation amplifier in a through-hole DIP package, with 25 MHz bandwidth and 5 V/µs slew rate. Its input offset is 25 µV versus the AMP02EPZ's 20 µV, and its operating temperature range is 0°C to 70°C (commercial), so check your temperature requirements before substituting.

What is the typical application of the AMP02EPZ?

Typical applications include bridge sensor amplification, strain-gauge signal conditioning, thermocouple front-ends, and general-purpose industrial instrumentation where low offset and high common-mode rejection are needed.