Simple Reset/Power-On Reset supervisor IC, ADM8698ARN-REEL, active-low reset, push-pull output, 140ms minimum timeout, 8-SOIC surface mount package.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Number of voltages monitored | 1 |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Bulk |
| Reset timeout | 140ms Minimum |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
The ADM8698ARN-REEL: The reset output is push-pull, totem-pole, so it drives the reset line directly without an external pull-up resistor. Reset timeout is 140ms minimum — this holds the microprocessor in reset long enough for the supply and oscillator to stabilise after power-up.
Submit an RFQ through this listing.
The ADM809MAKS-REEL shares the same reset type (active low), output structure (push-pull), reset timeout (140ms minimum), and package (8-SOIC). However, the monitored threshold voltage differs — the ADM8698ARN-REEL monitors at 4.65V, while the ADM809MAKS-REEL monitors at a lower voltage. They are not pin-compatible drop-ins; verify the threshold and pinout against your BOM before substituting.