W25Q32JWZPIQ

Winbond Electronics · SpiFlash® Series

IC FLASH 32MBIT SPI/QUAD 8WSON

Winbond Electronics W25Q32JWZPIQ
Download datasheet (PDF)
[IN STOCK] In Stock: 10 pcs
$4.55/ pc

Volume pricing

Buy Now

MOQ 1 · Tube · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

W25Q32JWZPIQ specifications
Parameter / AttributeSpecification / Value
SeriesSpiFlash®
Memory typeNon-Volatile
MountingSurface Mount
Supply voltage1.7V ~ 1.95V
Clock frequency133 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 85°C (TA)
PackageTube
TechnologyFLASH - NOR
Memory size32Mbit
Memory formatFLASH
Case8-WDFN Exposed Pad
Memory organization4M x 8
Write cycle time - word, page5ms
100% Footprint Match · Solder-Ready (No PCB Redesign Needed)

Need Stock or a Drop-in Second-Source for W25Q32JWZPIQ?

Package: SOIC-8 208mil · Pin-compatible replacements with immediate Shenzhen spot stock

Footprint Match 99%
Supply Chain & Allocation Reality:

W25Q128JVSIQ is the reference SPI Flash for firmware storage on Wi-Fi/BLE IoT gateways, Linux SoC bootloaders, and FPGA configuration. GigaDevice GD25Q128CSIG and XTX XT25F128B deliver direct drop-in replacement with identical Jedec SPI instruction sets with immediate spot availability and verified lot traceability.

Verified Pin-Compatible Replacements (1 verified alternatives)

GD25Q128CSIG GigaDevice SOIC-8 208mil
100% Drop-in (Zero Code Change)
Availability & Target Pricing:

Top-Tier Flash Vendor with Full JEDEC Command Compatibility

Millions in Shenzhen Spot Stock (24h Dispatch)

Electrical & Core Specs:

Standard / Dual / Quad SPI, DTR up to 133 MHz (532 MB/s equivalent)

2.7V – 3.6V

Compatibility & Drop-In Notes: Standard SPI command set (Read: 03h/0Bh, Page Program: 02h, Sector Erase: 20h, Block Erase: D8h). If firmware validates JEDEC ID (9Fh), ensure firmware lookup table accepts GigaDevice Manufacturer ID (0xC8) alongside Winbond (0xEF).
Package & Solder Footprint: Exact 208mil SOIC-8 footprint drop-in. Compatible with high-speed SPI trace layout.
Shenzhen Warehouse Stock & MOQ: Top-tier global Flash vendor; high-volume Tier 1 OEM approved.
Buyer & Quality Checklist for Sourcing Alternatives
  • Check JEDEC ID verification in bootloader: Winbond JEDEC ID = EF 40 18h; GigaDevice JEDEC ID = C8 40 18h. If your Linux / RTOS bootloader checks exact manufacturer ID, add GD25Q128 entry to device tree / SPI flash table.
  • Verify Quad SPI (QPI) bit configuration: standard Quad Read commands (EBh) operate identically across both chips.
Frequently Asked Technical Questions

Q: Will Linux kernel mtd / spi-nor driver automatically recognize GD25Q128CSIG?

A: Yes. Mainline Linux kernel spi-nor driver has supported GD25Q128 for over a decade. It automatically reads SFDP (Serial Flash Discoverable Parameters) tables and negotiates optimal Quad SPI clock speeds.

W25Q32JWZPIQ
[ALLOC] verified
Quote