Automotive-grade transient suppression for 24V rails
The 1.5KE24AHE3_A/C: It clamps transients on 24V nominal power lines — the 20.5V reverse standoff voltage sits below the rail, and the 33.2V clamp at 45.2A peak pulse current (10/1000µs waveform) shunts surges before they reach downstream electronics.
Package and board-fit for through-hole layouts
Housed in a DO-201AA (DO-27) axial-leaded package, the 1.5KE24AHE3_A/C mounts through-hole on single-sided or multi-layer boards. The 1.5KE base product number shares the same footprint across the series — a 24V rail design can swap to a different breakdown voltage without layout changes. No power line protection feature is built in — this is a standalone TVS diode, not a integrated protection IC. The unidirectional channel protects one signal or power rail per device.