TLP2710(TP,E

Toshiba Semiconductor

Toshiba TLP2710(TP,E, single-channel high-speed logic output optocoupler, 5MBd data rate, 5000Vrms isolation, push-pull totem-pole output, 6-SOIC package, -40°C to 125°C.

Toshiba Semiconductor TLP2710(TP,E
Download datasheet (PDF)
[IN STOCK] In Stock: 1,172 pcs
$1.50/ pc

Volume pricing

Buy Now

MOQ 1 · Tape & Reel (TR); Cut Tape (CT) · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

TLP2710(TP,E specifications
Parameter / AttributeSpecification / Value
Input typeDC
Output typePush-Pull, Totem Pole
MountingSurface Mount
Supply voltage2.7V ~ 5.5V
Voltage - isolation5000Vrms
Voltage - forward (Vf)1.9V (Max)
Current - output (Channel)10 mA
Current - DC forward (If)8mA
Operating temperature-40°C ~ 125°C
PackageTape & Reel (TR); Cut Tape (CT)
Data rate5MBd
Case6-SOIC (0.295\", 7.50mm Width)
Channels1
Inputs - side 1/Side 21/0
Rise (Fall time)11ns, 13ns
Propagation delay tpLH (tpHL)250ns, 250ns
Common mode transient immunity25kV/µs

Technical details

5MBd logic output with 5000Vrms isolation

The TLP2710(TP,E is a single-channel, high-speed optocoupler from Toshiba delivering a 5MBd data rate with a push-pull totem-pole output. The 5000Vrms isolation rating meets reinforced insulation requirements for motor drives, industrial PSUs, and PLC I/O modules where galvanic separation between the controller and high-voltage side is non-negotiable.

25kV/µs CMTI keeps the output clean in noisy switching

Common-mode transient immunity of 25kV/µs minimum means this part holds its logic state when the ground plane jumps during IGBT or SiC FET switching — a spec that separates a reliable gate-drive interface from one that glitches. The 250ns max propagation delay in both directions keeps the timing budget tight for PWM loops running above 50 kHz.

Active production with wide supply and temp range

Supply voltage spans 2.7V to 5.5V, which covers 3.3V and 5V logic rails without a separate regulator. ROHS3 compliant.

6-SOIC package and tape-reel delivery

Housed in a 6-SOIC package with 7.50mm body width, surface-mount. The 8mA max forward current and 10mA output per channel keep the thermal load low — no heatsink needed. Store the reels dry;.

TLP2710(TP,E
[ALLOC] verified
Quote