Skip to main content
Log in
Toshiba Semiconductor TLP2710(TP4,E — Optoisolators

TLP2710(TP4,E Optocoupler, 5MBd, 5000Vrms Isolation, 6-SOIC

MPNTLP2710(TP4,E
End of Life

Toshiba TLP2710(TP4,E high-speed logic output optocoupler, 5MBd data rate, 5000Vrms isolation, push-pull totem-pole output, 2.7V to 5.5V supply, -40°C to 125°C, 6-SOIC package.

$1.57Ref. price · indicative, final on quote
Toshiba Semiconductor TLP2710(TP4,E datasheet (PDF)
Packaging6-SOIC (0.295", 7.50mm Width)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLP2710(TP4,E specifications
ParameterValue
Input typeDC
Output typePush-Pull, Totem Pole
MountingSurface Mount
Voltage2.7V ~ 5.5V
Voltage - isolation5000Vrms
Voltage - forward (Vf)1.9V (Max)
Current - output (Channel)10 mA
Current - DC forward (If)8mA
Operating temperature-40°C ~ 125°C
PackageTape & Reel (TR); Cut Tape (CT)
Data rate5MBd
Case6-SOIC (0.295\", 7.50mm Width)
Channels1
Inputs - side 1/Side 21/0
Rise (Fall time)11ns, 13ns
Propagation delay tpLH (tpHL)250ns, 250ns
Common mode transient immunity25kV/µs

Product details

High-speed digital isolator for industrial and automotive signal paths

The Toshiba TLP2710(TP4,E is a single-channel, high-speed logic-output optocoupler rated for 5MBd data rate and 5000Vrms isolation voltage. Propagation delay is 250ns max, and common-mode transient immunity is 25kV/µs minimum, which keeps the output clean during fast switching events on the high-voltage side.

The 5000Vrms isolation rating qualifies this optocoupler for reinforced insulation in mains-connected equipment, such as industrial drives and grid-tied power supplies. With 11ns rise and 13ns fall times, the output edges stay clean enough for 5MBd signalling without extra schmitt-trigger buffering on the receiving side.

Temperature range and supply compatibility

The 2.7V to 5.5V supply range means it can be powered from a 3.3V rail in a modern MCU interface or from a 5V rail in legacy PLC backplanes. The forward diode requires 1.9V typical and 8mA max input current, which is within the drive capability of most 3.3V CMOS outputs.

Supplied in a 6-SOIC wide-body package (7.50mm body width) with a 6-SO supplier device code. Surface-mount only. The wide creepage distance supports the 5000Vrms rating.

Frequently asked questions

What is the data rate of TLP2710?

The TLP2710(TP4,E is rated for 5MBd data rate, with a maximum propagation delay of 250ns in both directions.

Is TLP2710(TP4,E compatible with 3.3V?

Yes, the supply range is 2.7V to 5.5V, so it works directly on a 3.3V rail. The input forward voltage is 1.9V typical, well within 3.3V CMOS drive capability.

When sourcing TLP2710(TP4,E, what's the closest functional second-source — TLP2310(TPL,E?

The TLP2310(TPL,E is a close functional peer with the same 5MBd data rate, push-pull output, and 250ns propagation delay, but its isolation voltage is 3750Vrms versus the TLP2710's 5000Vrms. If your barrier requires 5000Vrms, the TLP2710 is the correct fit; for 3750Vrms applications the TLP2310 is a pin-compatible alternative.