Skip to main content
Toshiba Semiconductor TLP184(BL-TPL,SE — Optoisolators

Toshiba TLP184(BL-TPL,SE Optocoupler, 3750Vrms, 6-SOP

MPNTLP184(BL-TPL,SE
End of Life

Toshiba TLP184(BL-TPL,SE single-channel transistor-output optocoupler, 3750Vrms isolation, 200%–600% CTR at 5mA, AC/DC input, 6-SOP surface-mount package, -55°C to 110°C.

$0.5Ref. price · indicative, final on quote
Packaging6-SOIC (0.173", 4.40mm Width), 4 Leads
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLP184(BL-TPL,SE specifications
ParameterValue
Input typeAC, DC
Output typeTransistor
MountingSurface Mount
Voltage - isolation3750Vrms
Voltage - output80V
Voltage - forward (Vf)1.25V
Current - output (Channel)50mA
Current transfer ratio600% @ 5mA
Current - DC forward (If)50 mA
Operating temperature-55°C ~ 110°C
PackageTape & Reel (TR); Cut Tape (CT)
Case6-SOIC (0.173\", 4.40mm Width), 4 Leads
Channels1
Vce saturation300mV
Rise (Fall time)2µs, 3µs
Turn on (Turn off time)3µs, 3µs

Product details

Single-channel optocoupler with AC/DC input and 3750Vrms isolation

The Toshiba TLP184(BL-TPL,SE is a single-channel transistor-output optocoupler in a 6-SOP surface-mount package. The output transistor is rated for 80V and 50mA continuous, with a typical Vce(sat) of 300mV.

The BL rank CTR floor of 200% at 5mA If means the output transistor can saturate with a relatively low LED current — useful when the microcontroller GPIO or a logic gate drives the LED directly through a series resistor. The 600% ceiling gives headroom for degraded LED output over temperature or lifetime. Typical turn-on and turn-off times are 3µs each, with rise/fall times of 2µs and 3µs respectively, so the part handles 100 kbps signaling without issue. For faster edges, the 3µs propagation delay needs to be budgeted in the control-loop phase margin.

Frequently asked questions

What is the difference between TLP184 and TLP185?

The TLP184 is a single-channel optocoupler; the TLP185 is a dual-channel device. Both share the same 6-SOP package outline and 3750Vrms isolation rating, but the TLP185 contains two independent transistor-output channels in one package. For a single-channel design, the TLP184 is the correct choice.