Skip to main content
TC7WPN3125FK~6LF~1CT

TC7WPN3125FK,LF(CT Bus Switch, 2 x 1:1, Dual Supply

MPNTC7WPN3125FK,LF(CT
End of Life

Toshiba Semiconductor TC7WP series Bus Switch, 2 x 1:1, dual supply 1.1V~2.7V / 1.65V~3.6V, surface mount 8-VFSOP (2.30mm width), 8-SSOP, -40°C to 85°C, ROHS3.

$0.48Ref. price · indicative, final on quote
Packaging8-VFSOP (0.091", 2.30mm Width)
RoHSROHS3 Compliant
SeriesTC7WP
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TC7WPN3125FK,LF(CT specifications
ParameterValue
TypeBus Switch
SeriesTC7WP
MountingSurface Mount
Supply voltage1.1V ~ 2.7V, 1.65V ~ 3.6V
Voltage supply sourceDual Supply
Current - output high, low3mA, 3mA
Operating temperature-40°C ~ 85°C (TA)
Circuit2 x 1:1
PackageTape & Reel (TR); Cut Tape (CT)
Case8-VFSOP (0.091\", 2.30mm Width)
Independent circuits1

Product details

Dual-supply bus switch for voltage-domain crossing

The TC7WPN3125FK,LF(CT is a Toshiba TC7WP-series Bus Switch with two independent 1:1 single-pole single-throw (SPST) channels. Each channel passes signals in either direction; the switch is ON when the corresponding output-enable pin is asserted. The 3 mA output drive at both high and low states is modest — this part is a pass-gate for digital signals, not a line driver. It suits isolation of shared buses (I²C, SPI chip-select lines) where the load side needs to be disconnected when the bus is idle.

Package and temperature grade for board integration

Housed in an 8-VFSOP package (0.091" body width, 2.30 mm) with the 8-SSOP supplier device footprint, this is a fine-pitch surface-mount part. The 0.50 mm pin pitch demands careful solder-paste stencil design — a 4-mil stencil with a 1:1 aperture-to-land ratio is typical for this package class.