Low-voltage AND gate for mixed-voltage boards
The 74LCX08FT: It packs four independent AND gates into a 14-TSSOP package, each gate accepting two inputs and delivering a clean high or low output — the basic glue logic for address decoding, enable gating, or status combining in a mixed-voltage system.
5.5 ns propagation delay and 24 mA output drive
Quiescent current sits at 10 µA maximum, so the gate draws negligible power when the inputs are static — useful in battery-powered designs where the logic bank stays enabled but idle.
Industrial temperature range in a fine-pitch TSSOP
The 14-TSSOP package has a 0.65 mm pin pitch and a 4.40 mm body width, so the board layout needs a standard fine-pitch footprint — no exotic via-in-pad required, but the soldering profile must match the JEDEC MSL level for this package. Surface-mount assembly with tape-and-reel or cut-tape packaging — the reel quantity suits volume pick-and-place, while cut tape is available for prototype runs.
Fully RoHS3 compliant, no exemptions that would trip up a European or California-market BOM review.