Skip to main content
Log in
Texas Instruments UCC27536DBVT — Power Management (PMIC / Gate Driver)

UCC27536DBVT Low-Side Gate Driver, 2.5 A Peak, SOT-23-5

MPNUCC27536DBVT
Active

Texas Instruments UCC27536DBVT single low-side gate driver, 2.5 A peak source/sink, 15 ns rise / 10 ns fall, drives IGBT and N-Channel MOSFET, inverting input, 10 V to 32 V supply, SOT-23-5 package.

$1.6700Ref. price · indicative, final on quote
Texas Instruments UCC27536DBVT datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

UCC27536DBVT specifications
ParameterValue
Gate typeIGBT, N-Channel MOSFET
Input typeInverting
Channel typeSingle
MountingSurface Mount
Supply voltage10V ~ 32V
Logic voltage - VIL, VIH1.2V, 2.2V
Current - peak output (Source, sink)2.5A, 2.5A
Operating temperature-40°C~140°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
CaseSC-74A, SOT-753
Number of drivers1
Driven configurationLow-Side
Rise (Fall time)15ns, 10ns

Product details

2.5 A peak output — gate charge delivery for IGBTs and MOSFETs

It drives both IGBT and N-Channel MOSFET gates, making it a fit for switched-mode power supplies, motor drives, PFC stages, and inverter legs where a single low-side switch needs fast, clean gate drive.

10 V to 32 V bias — runs from industrial supply rails

The supply range from 10 V to 32 V covers common industrial bus voltages (12 V, 24 V) without an intermediate regulator.

140°C junction rating — thermal margin for hot environments

In a motor-drive cabinet or under-hood electronics where ambient air can reach 85°C to 105°C, the junction stays within limits even with repetitive switching losses.

SOT-23-5 footprint — board-area consideration

The UCC27536DBVT comes in the SOT-23-5 package (SC-74A, SOT-753), a 5-pin surface-mount footprint that fits tight layouts.

Frequently asked questions

Can the UCC27536DBVT drive an IGBT gate?

Yes. The gate type is specified for IGBT and N-Channel MOSFET. The 2.5 A peak output and 15 ns rise time provide enough drive strength for small to medium IGBTs in the 600 V to 1200 V class, typical in motor drives and inverters.