TPS7A2025PYCJR

Texas Instruments

Texas Instruments TPS7A2025PYCJR, ultra-low-noise LDO voltage regulator, fixed 2.5V output, 300mA, 15µA quiescent current, 65dB~40dB PSRR (100Hz~1MHz), 4-DSBGA (0.62x0.62mm), -40°C~125°C.

Texas Instruments TPS7A2025PYCJR
Download datasheet (PDF)
[IN STOCK] In Stock: 265 pcs
$0.54/ pc

Volume pricing

Buy Now

Subtotal:$2.70

MOQ 5 · Tape & Reel (TR); Cut Tape (CT) · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

TPS7A2025PYCJR specifications
Parameter / AttributeSpecification / Value
Output typeFixed
MountingSurface Mount
Voltage - input6V
Voltage dropout0.14V @ 300mA
Voltage - output (Min (Fixed))2.5V
Output current300mA
Current - quiescent15 µA
Operating temperature-40°C ~ 125°C (TJ)
PSRR65dB ~ 40dB (100Hz ~ 1MHz)
PackageTape & Reel (TR); Cut Tape (CT)
Case4-XFBGA, DSBGA
Control featuresCurrent Limit, Enable, Soft Start
Protection featuresOver Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
Number of regulators1
Output configurationPositive

Technical details

2.5 V fixed LDO for noise-sensitive supply rails

The TPS7A2025PYCJR is a single-output, positive-voltage LDO regulator delivering a fixed 2.5 V at up to 300 mA. PSRR is 65 dB at 100 Hz rolling to 40 dB at 1 MHz.

Protection and control features for unattended gear

Built-in protection covers over-current, over-temperature, short-circuit, and under-voltage lockout (UVLO). The enable pin and soft-start are included — useful for sequencing multiple rails or limiting inrush into a capacitive load. The UVLO threshold prevents the output from turning on until the input is high enough to regulate, which avoids brown-out glitches on the downstream load. These features suit remote or always-on equipment where a fault must not latch the system into an unpowered state.

The 300 mA output at high ambient temperature needs a thermal check against the power dissipation.

The ROHS3 compliance is documented.

TPS7A2025PYCJR
[ALLOC] verified
Quote