Skip to main content
Texas Instruments TPS7A0322PDBVR — Power Management (PMIC / Gate Driver)

TI TPS7A0322PDBVR LDO Regulator, 2.2V Fixed, 200mA, SOT-23-5

MPNTPS7A0322PDBVR
End of Life

Texas Instruments TPS7A0322PDBVR, fixed-output LDO, 2.2V, 200mA, 300 nA quiescent current, 55dB PSRR at 1kHz, SOT-23-5, -40°C to 125°C, active.

$0.94Ref. price · indicative, final on quote
PackagingSC-74A, SOT-753
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPS7A0322PDBVR specifications
ParameterValue
Output typeFixed
MountingSurface Mount
Voltage - input6V
Voltage dropout0.45V @ 200mA
Voltage - output (Min (Fixed))2.2V
Output current200mA
Current - quiescent300 nA
Operating temperature-40°C ~ 125°C (TJ)
PSRR55dB (1kHz)
PackageTape & Reel (TR); Cut Tape (CT)
CaseSC-74A, SOT-753
Control featuresEnable
Protection featuresOver Current, Over Temperature, Under Voltage Lockout (UVLO)
Number of regulators1
Output configurationPositive

Product details

What this LDO actually does

The TPS7A0322PDBVR is a single-channel, positive-output, fixed 2.2 V LDO from Texas Instruments, rated for 200 mA continuous output. It comes in a SOT-23-5 package and is surface-mount only.

On-chip protection includes over-current, over-temperature, and under-voltage lockout (UVLO). The UVLO keeps the output off until the input voltage rises above the threshold, which prevents the load from seeing a brown-out condition during startup. No derating needed up to the full 200 mA across that range, as long as the PCB copper area can sink the heat.

Enable pin and control

Frequently asked questions

Can TPS7A0322PDBVR be used in battery-powered devices?

Yes, the 300 nA quiescent current makes it well-suited for battery-powered designs — always-on sensor nodes, wearables, or IoT endpoints where every microamp matters. The 2.2 V output is common for low-power MCUs and RF transceivers. The enable pin lets you shut it down completely when the system sleeps.

What is TPS7A0322PDBVR's PSRR at 1 kHz?

The listed PSRR is 55 dB at 1 kHz. That means ripple on the input is attenuated by a factor of about 560 at that frequency. It is high enough to clean up a switching regulator's output for sensitive analog loads.