Fixed 2.5 V rail for noise-sensitive loads
It is built for surface-mount assembly in the SOT-23-5 footprint.
Protection set and temperature range
On-chip protection includes over-current, over-temperature, and reverse polarity. Operating temperature range spans -40°C to 125°C. Maximum input voltage is 10 V.
Enable pin and fixed output
A dedicated Enable pin lets a system controller sequence the rail on/off without a separate load switch. Because the output is fixed at 2.5 V, there is no external resistor divider — the BOM keeps two passives off the board. This is a straight drop-in for any 2.5 V rail that needs regulation, not a variable-output part you tune.
No LTB clock ticking on this one.