Skip to main content
TPS76801QD

Texas Instruments TPS76801QD LDO Regulator, 1A, Adjustable

MPNTPS76801QD
End of Life

Texas Instruments TPS76801QD adjustable LDO regulator, 1 A output, 1.2 V to 5.5 V output range, 8-SOIC (0.154", 3.90 mm Width) surface mount package, tube.

$4.25Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPS76801QD specifications
ParameterValue
Output typeAdjustable
MountingSurface Mount
Voltage - input10V
Voltage - output5.5V
Voltage - output (Min (Fixed))1.2V
Output current1A
Current - quiescent125 µA
Operating temperature-40°C ~ 125°C
PSRR60dB (1kHz)
PackageTube
Case8-SOIC (0.154\", 3.90mm Width)
Control featuresEnable, Power Good
Protection featuresOver Current, Over Temperature, Reverse Polarity
Number of regulators1
Output configurationPositive

Product details

1 A adjustable LDO — rail flexibility for analog and logic

The TPS76801QD is a single-output positive adjustable linear regulator delivering 1 A from a 1.2 V to 5.5 V output range. 60 dB PSRR at 1 kHz attenuates switching ripple from a preceding DC-DC converter — relevant for powering analog front-ends, ADCs, or sensor bias where supply noise couples into the signal path. Enable and Power Good pins simplify power-up sequencing and rail monitoring without an external supervisor IC.

Temperature grade and protection for demanding environments

Integrated over-current, over-temperature, and reverse polarity protection allow the regulator to survive output shorts, thermal runaway conditions, and reversed battery connections in field wiring scenarios. Quiescent current is 125 µA typical — low enough for always-on domains in battery-backed systems, though not as aggressive as dedicated ultra-low-Iq LDOs.

Active production — sourcing and compliance

Supplied in tube (standard 8-SOIC carrier).

Frequently asked questions

What is TPS76801QD's PSRR and why does it matter?

PSRR is 60 dB at 1 kHz. That means switching noise from a pre-regulator at that frequency is attenuated by a factor of 1000 — critical for powering sensitive analog circuits where supply ripple would otherwise appear on the output.