Skip to main content
Texas Instruments TPS62932DRLR — Power Management (PMIC / Gate Driver)

TPS62932DRLR – TI Buck Converter, 2A, Adjustable, SOT-583

MPNTPS62932DRLR
Active

Texas Instruments TPS62932DRLR, step-down buck regulator, adjustable output 0.8 V to 22 V, 2 A continuous, SOT-583 package, -40°C to 150°C junction temperature.

$0.7200Ref. price · indicative, final on quote
PackagingSOT-583
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPS62932DRLR specifications
ParameterValue
Output typeAdjustable
MountingSurface Mount
Voltage - input3.8V
Voltage - output22V
Voltage - output (Min (Fixed))0.8V
Output current2A
Frequency - switching200kHz ~ 2.2MHz
I/O channels1
Operating temperature-40°C ~ 150°C (TJ)
PackageTape & Reel (TR) Cut Tape (CT)
FunctionStep-Down
TopologyBuck
CaseSOT-583
Output configurationPositive
Synchronous rectifierYes

Product details

2 A continuous in a 1.6×2.1 mm footprint

Rated for 2 A continuous output in a SOT-583 package — that is the same silicon capability as a larger SOIC-8 but in roughly one-quarter the board area. The synchronous rectifier keeps the efficiency curve flat across load, so the 2 A rating is usable, not a peak number.

Adjustable output from 0.8 V to 22 V

Output voltage is adjustable from a 0.8 V reference up to 22 V with a simple resistor divider. That covers 1.2 V core rails, 3.3 V I/O, 5 V logic, and 12 V bias from a single BOM line. Input range is 3.8 V to 30 V, so it works from a 5 V or 12 V rail directly.

150°C junction — suited for high-ambient environments

The 150°C ceiling allows operation in engine-bay electronics, industrial enclosures, or outdoor telecom cabinets where the ambient can push 85°C and the self-heating from 2 A output adds another 30-40°C.

Switching frequency range — 200 kHz to 2.2 MHz

Lower frequencies improve efficiency at light load; higher frequencies shrink the inductor and output capacitor, which helps the SOT-583 layout keep the loop area small.

Frequently asked questions

Does TPS62932DRLR require external compensation?

The TPS62932 uses internal compensation — no external RC network is needed. The switching frequency is set by a single resistor, and the loop is stable across the output voltage and load range.