Skip to main content
Log in
Texas Instruments TPS62737RGYT — Power Management (PMIC / Gate Driver)

TPS62737RGYT – TI Step-Down Buck Converter, 200 mA, 2 MHz

MPNTPS62737RGYT
Active

Texas Instruments TPS62737RGYT, step-down (buck) switching regulator, 2V–5.5V input, programmable output 1.3V–5V, 200 mA continuous output, 2 MHz switching frequency, synchronous rectifier, 14-VFQFN exposed pad package, -20°C to 85°C operating temperature.

$7.2300Ref. price · indicative, final on quote
Texas Instruments TPS62737RGYT datasheet (PDF)
Packaging14-VFQFN Exposed Pad
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPS62737RGYT specifications
ParameterValue
Output typeProgrammable
MountingSurface Mount
Voltage - input5.5V
Voltage - output5V
Voltage - output (Min (Fixed))1.3V
Output current200mA
Frequency - switching2MHz
I/O channels1
Operating temperature-20°C~85°C(TA)
PackageTape & Reel (TR); Cut Tape (CT)
FunctionStep-Down
TopologyBuck
Case14-VFQFN Exposed Pad
Output configurationPositive
Synchronous rectifierYes

Product details

200 mA step-down for portable power rails

The TPS62737RGYT is a synchronous buck converter from Texas Instruments that delivers up to 200 mA continuous output from a 2V to 5.5V input rail.

2 MHz switching and programmable output

Switching at 2 MHz keeps the ripple well above the audible band and lets the output filter use a 1 µH to 4.7 µH inductor and 10 µF ceramic cap — typical for a 200 mA rail. The programmable output range from 1.3V to 5V covers common logic and sensor supplies; set the feedback divider for exactly 3.3V or 1.8V as needed. The 14-VQFN package (3.5x3.5 mm) with exposed pad helps pull heat into the PCB ground plane — the pad is the main thermal path, so a good solder joint under it matters for full current delivery at high ambient.

Sourcing is per RFQ — confirm the BOM quantity and lead time at quote.

Frequently asked questions

Is TPS62737RGYT compatible with 3.3V output?

Yes — the output is programmable from 1.3V to 5V via external feedback resistors. Setting the divider for 3.3V is straightforward; the datasheet provides the resistor values for common output voltages.

What are the alternatives to TPS62737RGYT?

For a higher current rail, the LMR33630APCQRNXRQ1 is a 3 A automotive-grade buck converter, but it operates at 2.1 MHz and requires a larger inductor. The LM2750LD-ADJ/NOPB is a charge pump (step-up only, 120 mA) — not a buck replacement. Within the same current class, the TPS62737 is the direct fit.

Can TPS62737RGYT be used in battery-powered devices?

Yes — the 2V minimum input voltage works with a single Li-ion cell (3.0V–4.2V) or two alkaline cells, and the 200 mA output is sufficient for a sensor node, Bluetooth module, or small MCU. The synchronous rectifier improves efficiency at light loads, extending battery run time.