Texas Instruments TPS62230DRYT, a synchronous step-down (buck) regulator, fixed 2.5 V output, 500 mA continuous, 3 MHz switching frequency, in a 6-pin SON (1.45 mm × 1 mm) package.
| Parameter | Value |
|---|---|
| Output type | Fixed |
| Mounting | Surface Mount |
| Voltage - input | 2.05V |
| Voltage - output (Min (Fixed)) | 2.5V |
| Output current | 500mA |
| Frequency - switching | 3MHz |
| I/O channels | 1 |
| Operating temperature | -40°C~125°C(TJ) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Function | Step-Down |
| Topology | Buck |
| Case | 6-UFDFN |
| Output configuration | Positive |
| Synchronous rectifier | Yes |
The TPS62230DRYT is a fixed 2.5 V output, 500 mA synchronous buck converter from Texas Instruments, switching at 3 MHz. It accepts an input from 2.05 V to 6 V, so it can run directly off a single Li-ion cell or a 3.3 V / 5 V rail.
The 6-SON package measures 1.45 mm × 1 mm — that is a tiny footprint. Without a solid ground plane, the 500 mA output at high ambient will push the junction toward the 125 °C limit.
Submit an RFQ for a firm commitment.
Buyers need to confirm that the fixed 2.5V output matches their power rail requirement.
Lifecycle status determines if the part is still available for new designs or has procurement risk.
Engineers and buyers need to know authorized distributors and current stock to source the part.
Package dimensions and footprint are critical for PCB layout and assembly compatibility.
Correct inductor selection is essential for the buck converter to achieve stable output and efficiency.
Enable functionality is often needed for power sequencing or low-power modes; buyers check the datasheet for this feature.