Texas Instruments
Texas Instruments Automotive, AEC-Q100, DCS-Control™ series, TPS62150AQRGTTQ1, step-down (buck) converter, adjustable output, 1 A output, 2.5 MHz switching frequency, 3 V to 17 V input, -40°C to 125°C, 16-VFQFN exposed pad, surface mount.
MOQ 1 · Tape & Reel (TR); Cut Tape (CT) · RoHS · EIA-481 · DAP/DDP · T/T
| Parameter / Attribute | Specification / Value |
|---|---|
| Series | Automotive, AEC-Q100, DCS-Control™ |
| Output type | Adjustable |
| Mounting | Surface Mount |
| Voltage - input | 17V |
| Voltage - output | 6V |
| Voltage - output (Min (Fixed)) | 0.9V |
| Output current | 1A |
| Frequency - switching | 2.5MHz |
| I/O channels | 1 |
| Operating temperature | -40°C~125°C(TJ) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Function | Step-Down |
| Topology | Buck |
| Case | 16-VFQFN Exposed Pad |
| Output configuration | Positive |
| Synchronous rectifier | Yes |
Switching at 2.5 MHz lets the designer use a small 1 µH to 2.2 µH inductor and ceramic output capacitors, shrinking the total solution footprint. The trade-off is that the fast edges demand a tight layout — keep the input cap and inductor loop short, and place the feedback resistor divider close to the FB pin to avoid noise injection.
