Skip to main content
Log in
Texas Instruments TPS62131RGTT — Power Management (PMIC / Gate Driver)

TPS62131RGTT TI DCS-Control Buck Regulator 1.8V 3A

MPNTPS62131RGTT
Active

Texas Instruments DCS-Control™ series, TPS62131RGTT, a synchronous step-down buck regulator, fixed 1.8V output, 3A continuous, 2.5MHz switching, in a 16-VFQFN exposed-pad package.

$2.3800Ref. price · indicative, final on quote
Texas Instruments TPS62131RGTT datasheet (PDF)
Packaging16-VFQFN Exposed Pad
RoHSROHS3 Compliant
SeriesDCS-Control™
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPS62131RGTT specifications
ParameterValue
SeriesDCS-Control™
Output typeFixed
MountingSurface Mount
Voltage - input17V
Voltage - output (Min (Fixed))1.8V
Output current3A
Frequency - switching2.5MHz
I/O channels1
Operating temperature-40°C~85°C(TA)
PackageTape & Reel (TR); Cut Tape (CT)
FunctionStep-Down
TopologyBuck
Case16-VFQFN Exposed Pad
Output configurationPositive
Synchronous rectifierYes

Product details

Fixed 1.8V rail from 3V to 17V input

The TPS62131RGTT is a synchronous step-down (buck) regulator from the DCS-Control™ family, delivering a fixed 1.8V output at up to 3A continuous current. Input range spans 3V to 17V, covering common 5V, 12V, and 15V buses without external level shifting.

For a new design-in or a BOM fill, this is a current, supported part with no imminent supply disruption.

Thermal and layout notes for the 3x3 QFN

The datasheet recommends a 4-layer PCB with at least 4 vias in the thermal land.

Single-output, positive-configuration regulator

This is a single-output, positive-configuration regulator. The fixed 1.8V output means no external resistor divider is needed for the feedback — just the output capacitor and inductor. The DCS-Control™ architecture provides fast transient response and a seamless transition between PWM and power-save modes at light loads, which matters for battery-powered or low-standby designs.

Frequently asked questions

Is TPS62131RGTT compatible with TPS62130?

The TPS62131RGTT is the fixed 1.8V output variant in the same family. The TPS62130 is an adjustable output version (typically 0.9V to VIN). They share the same pinout, package, and 3A current rating, so a board designed for the TPS62130 can accept the TPS62131RGTT if a 1.8V rail is acceptable.

Can TPS62131RGTT be used with a 5V input?

Yes. The input range is 3V to 17V, so 5V is well within the operating window. The 1.8V output will regulate normally.