Texas Instruments TPS62007DGSG4, step-down buck regulator, fixed 3.3 V output, 600 mA, 750 kHz switching, synchronous rectifier, -40°C to 85°C, 10-VSSOP package.
| Parameter | Value |
|---|---|
| Output type | Fixed |
| Mounting | Surface Mount |
| Voltage - input | 5.5V |
| Voltage - output (Min (Fixed)) | 3.3V |
| Output current | 600mA |
| Frequency - switching | 750kHz |
| I/O channels | 1 |
| Operating temperature | -40°C~85°C(TA) |
| Package | Tube |
| Function | Step-Down |
| Topology | Buck |
| Case | 10-TFSOP, 10-MSOP (0.118\", 3.00mm Width) |
| Output configuration | Positive |
| Synchronous rectifier | Yes |
The trade-off is slightly higher switching losses, but for a 600 mA part the thermal budget in the 10-VSSOP package is manageable.
The 10-VSSOP package (3.00 mm × 3.00 mm body, 0.50 mm pitch) is a surface-mount footprint that requires a 2-layer board with a solid ground plane under the IC for thermal relief.
Fixed output voltage is a key parameter not shown in the listing; design engineers need it for circuit validation.
Sourcing buyers need immediate availability to fill BOM lines; stock status drives purchase decisions.
Design engineers must confirm footprint and compatibility with the PCB layout.
Lifecycle status determines long-term availability and risk for production lines.
Cross-references help buyers find substitute parts if stock is low or for cost optimization.
Understanding external component count affects design complexity and BOM cost.