Texas Instruments TPS62003DGS, 10-VSSOP, step-down buck regulator, fixed 1.2 V output, 600 mA, 2.5 V to 5.5 V input, 750 kHz switching, synchronous rectifier, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Output type | Fixed |
| Mounting | Surface Mount |
| Voltage - input | 5.5V |
| Voltage - output (Min (Fixed)) | 1.2V |
| Output current | 600mA |
| Frequency - switching | 750kHz |
| I/O channels | 1 |
| Operating temperature | -40°C~85°C(TA) |
| Package | Tube |
| Function | Step-Down |
| Topology | Buck |
| Case | 10-TFSOP, 10-MSOP (0.118\", 3.00mm Width) |
| Output configuration | Positive |
| Synchronous rectifier | Yes |
Switching at 750 kHz lets you pick a smaller inductor — typically 4.7 µH to 10 µH — than a 300 kHz part, at the cost of slightly higher switching losses.
That covers most indoor and outdoor telecom, industrial control, and battery-powered equipment, but not under-hood automotive or high-density server racks where ambient exceeds 85°C.
No. The product status is Active with no end-of-life notification from Texas Instruments.
The evidence does not list a PG pin. The TPS62003DGS is a basic fixed-output buck without a power-good flag — if your design requires sequencing or voltage monitoring, consider the TPS62081DSGR which includes a PG output.
The TPS62081DSGR is in a different package (DSG-8, 2.0 mm × 2.0 mm), so the PCB footprint is not identical. For a pin-to-pin replacement, stick with the TPS62003DGS.