Skip to main content
Log in
Texas Instruments TPS61096ADSSR — Power Management (PMIC / Gate Driver)

TPS61096ADSSR Boost Regulator – 28V Output, 350mA Switch

MPNTPS61096ADSSR
Active

Texas Instruments TPS61096ADSSR, step-up boost regulator, adjustable output, 350 mA switch current, 1.8 V to 5.5 V input, 12-WSON (3x2) package, surface mount.

$1.6200Ref. price · indicative, final on quote
Texas Instruments TPS61096ADSSR datasheet (PDF)
Packaging12-WFDFN Exposed Pad
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPS61096ADSSR specifications
ParameterValue
Output typeAdjustable
MountingSurface Mount
Voltage - input5.5V
Voltage - output28V
Voltage - output (Min (Fixed))4.5V
Output current350mA (Switch)
I/O channels1
Operating temperature-40°C~150°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
FunctionStep-Up
TopologyBoost
Case12-WFDFN Exposed Pad
Output configurationPositive
Synchronous rectifierNo

Product details

Boost rail from a single cell or 5 V bus

The TPS61096ADSSR is a step-up (boost) converter from Texas Instruments that takes an input from 1.8 V to 5.5 V and delivers an adjustable output up to 28 V. The internal switch is rated for 350 mA, which sets the practical output current ceiling — for a 12 V output from a 3.3 V rail, expect around 80 mA available before the switch current limit is reached.

Output voltage range and setting

Output is adjustable from a minimum of 4.5 V up to 28 V via an external resistor divider. The 28 V ceiling makes this part suitable for biasing LCD backlight strings, driving op-amp rails, or powering sensor modules that need a higher voltage than the input bus.

Junction temperature and package thermal path

Rated for junction temperatures from -40°C to 150°C, the TPS61096ADSSR can operate in hot environments like an engine bay or an enclosed power supply.

Frequently asked questions

How can I order TPS61096ADSSR or check current stock?

Submit an RFQ for current pricing and lead time.

Is TPS61096ADSSR equivalent to TPS61096ADSST?

The base product number TPS61096 covers both suffix variants, but the exact suffix (DSSR vs. DSST) typically indicates packaging or reel quantity differences. Confirm the specific suffix with your BOM — the electrical specifications are shared across the TPS61096 family.

Does TPS61096ADSSR require external components?

Yes — as a boost regulator, it needs an inductor, input and output capacitors, and a feedback resistor divider to set the output voltage. The datasheet provides typical application circuits.

When sourcing TPS61096ADSSR, what is the closest functional second-source?

The LM2750LD-ADJ/NOPB is a charge-pump step-up with adjustable output, but it uses a different topology (charge pump vs. inductor-based boost) and has a lower output current (120 mA) and a lower maximum operating temperature (125°C). It is not a pin-compatible or direct electrical substitute — verify the topology and load requirements before cross-referencing.