Texas Instruments TPS61030PWP, Step-Up (Boost) DC-DC Converter, 1 Output, 3.6A Switch, 600kHz, Synchronous Rectifier, Adjustable Output 1.8V to 5.5V, 16-PowerTSSOP (HTSSOP), -40°C to 85°C.
| Parameter | Value |
|---|---|
| Output type | Adjustable |
| Mounting | Surface Mount |
| Voltage - input | 5.5V |
| Voltage - output | 5.5V |
| Voltage - output (Min (Fixed)) | 1.8V |
| Output current | 3.6A (Switch) |
| Frequency - switching | 600kHz |
| I/O channels | 1 |
| Operating temperature | -40°C~85°C(TA) |
| Package | Tube |
| Function | Step-Up |
| Topology | Boost |
| Case | 16-PowerTSSOP (0.173\", 4.40mm Width) |
| Output configuration | Positive |
| Synchronous rectifier | Yes |
The TPS61030PWP: This is a current-production part you can design in without a sunset clock.
The 3.6 A switch current rating is the headline number that sets the output power ceiling. In a typical boost from a single Li-ion cell (3.6 V) to 5 V, that switch can deliver roughly 2.2 A to the load before hitting the current limit — enough to power a Raspberry Pi or a string of LEDs from a battery.
Yes — the TPS61030PWPR is the same silicon in a Tape & Reel package option, while the PWP ships in a Tube. Electrically and pin-for-pin identical; the only difference is the shipping medium. If your assembly line feeds from reel, the PWPR is the direct swap.