Texas Instruments TPS22965NTDSGRQ1, Automotive Grade, AEC-Q100, 4 A max, 16 mOhm typical Rds(on), high-side N-channel load switch, 2.5 V to 5.5 V load, slew-rate controlled, 8-WSON (2x2) package.
| Parameter | Value |
|---|---|
| Input type | Non-Inverting |
| Output type | N-Channel |
| Type | General Purpose |
| Mounting | Surface Mount |
| Voltage - load | 2.5V ~ 5.5V |
| Voltage - supply (Vcc (Vdd)) | 0.8V ~ 5.5V |
| Output current | 4A |
| I/O channels | 1 |
| Interface | On/Off |
| Operating temperature | -40°C ~ 105°C (TA) |
| Grade | Automotive |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Slew Rate Controlled |
| Rds on | 16mOhm |
| Qualification | AEC-Q100 |
| Case | 8-WFDFN Exposed Pad |
| Output configuration | High Side |
| Ratio - Input:Output | 1:1 |
It is AEC-Q100 qualified, which places it in the automotive-grade bin for under-hood and cabin-domain power distribution. The 16 mOhm typical on-resistance keeps conduction losses low. The slew-rate controlled turn-on limits inrush current.
Yes, the TPS22965NTDSGRQ1 is AEC-Q100 qualified, which means it is released for automotive applications and has passed the stress tests defined by that standard.
The output is an N-channel MOSFET configured as a high-side switch. The switch is non-inverting — logic high on the enable pin turns the output on.
Yes, the TPS22965NTDSGRQ1 comes in an 8-WFDFN package with an exposed pad. The supplier device package is 8-WSON (2x2 mm). The exposed pad must be soldered to a PCB thermal land for heat dissipation.
No official pin-compatible second source is listed in the available cross-reference data. For an alternative within the same family, the base product number TPS22965 covers multiple variants; check the specific suffix for enable logic and package differences. Qualification of a different load-switch part would be required for dual-sourcing.