Texas Instruments TPS22961DNYT, General Purpose High-Side Load Switch, 6.5 mOhm Rds(on), 6 A Output, 3 V to 5.5 V Load, 0.8 V to 5.5 V Bias, 8-WSON (3x3 mm), -40°C to 125°C.
| Parameter | Value |
|---|---|
| Input type | Non-Inverting |
| Output type | N-Channel |
| Type | General Purpose |
| Mounting | Surface Mount |
| Voltage - load | 3V ~ 5.5V |
| Voltage - supply (Vcc (Vdd)) | 0.8V ~ 5.5V |
| Output current | 6A |
| I/O channels | 1 |
| Interface | On/Off |
| Operating temperature | -40°C~125°C(TJ) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Load Discharge, Slew Rate Controlled |
| Rds on | 6.5mOhm |
| Case | 8-WDFN Exposed Pad |
| Output configuration | High Side |
| Ratio - Input:Output | 1:1 |
The TPS22961DNYT: It handles a continuous 6 A load with a typical on-resistance of 6.5 mOhm.
Two integrated features simplify the power sequencing design. Slew-rate controlled turn-on limits inrush current into capacitive loads, reducing upstream voltage droop. When the switch is disabled, an internal load-discharge path pulls the output to ground, preventing a floating rail that could hold downstream logic in an undefined state.
The device is supplied in an 8-WDFN with exposed pad, also designated as 8-WSON (3x3 mm). The supplier device package is 8-WSON with a 3x3 mm body.