Skip to main content
Log in
Texas Instruments TPS22810DRVT — Power Management (PMIC / Gate Driver)

TPS22810DRVT load switch, 79 mOhm, 3 A, 2.7-18 V, 6-WSON

MPNTPS22810DRVT
Active

Texas Instruments TPS22810DRVT, 3 A load switch, 79 mOhm Rds(on) typ, 2.7-18 V load voltage, -40 to 105 °C, 6-WSON (2x2) package.

$1.3200Ref. price · indicative, final on quote
Texas Instruments TPS22810DRVT datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS22810DRVT specifications
ParameterValue
Input typeNon-Inverting
Output typeN-Channel
TypeGeneral Purpose
MountingSurface Mount
Voltage - load2.7V ~ 18V
Voltage - supply (Vcc (Vdd))Not Required
Output current3A
I/O channels1
InterfaceOn/Off
Operating temperature-40°C~105°C(TA)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesLoad Discharge, Slew Rate Controlled
Rds on79mOhm
Case6-WDFN Exposed Pad
Fault protectionOver Temperature, UVLO
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

The TPS22810DRVT: It handles a load voltage from 2.7 V to 18 V and delivers up to 3 A continuous output. The 79 mOhm typical on-resistance keeps conduction losses low.

Built-in features that simplify the BOM

Slew rate control limits inrush current during turn-on, which reduces voltage droop on the upstream rail and prevents false resets on downstream loads. The load discharge feature pulls the output to ground when the switch is off — no external pull-down resistor needed. Over-temperature and UVLO fault protection guard against a stalled fan or a sagging supply without adding a supervisor IC.

Frequently asked questions

Can the TPS22810DRVT handle input voltages above 12 V?

Yes. The 18 V ceiling gives margin for 12 V systems with transients.