TPS2051DR

Texas Instruments

Texas Instruments TPS2051DR, high-side power distribution switch, 1 output, 500 mA max, 80 mOhm typ Rds(on), 2.7 V to 5.5 V load, 8-SOIC, -40°C to 125°C.

TPS2051DR
Download datasheet (PDF)
[IN STOCK] In Stock: 1 pcs
$1.22/ pc

Volume pricing

Buy Now

MOQ 1 · Tape & Reel (TR) · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

TPS2051DR specifications
Parameter / AttributeSpecification / Value
Input typeNon-Inverting
Output typeN-Channel
TypeGeneral Purpose
MountingSurface Mount
Voltage - load2.7V ~ 5.5V
Voltage - supply (Vcc (Vdd))Not Required
Output current500mA
I/O channels1
InterfaceOn/Off
Operating temperature-40°C~125°C(TJ)
PackageTape & Reel (TR)
FeaturesStatus Flag
Rds on80mOhm
Case8-SOIC (0.154\", 3.90mm Width)
Fault protectionCurrent Limiting (Fixed), Over Temperature, UVLO
Output configurationHigh Side
Ratio - Input:Output1:1

Technical details

Protected high-side switch for USB and general-purpose loads

The TPS2051DR: It integrates a 80 mOhm typical N-channel MOSFET with fixed current limiting, over-temperature shutdown, and undervoltage lockout (UVLO) to protect the supply and the load.

500 mA continuous output — sizing the load budget

The TPS2051DR delivers up to 500 mA continuous output current. At full load the 80 mOhm Rds(on) produces a 40 mV drop and about 20 mW of self-heating — well within the 8-SOIC package's thermal capability at 25°C ambient.

Fault protection reduces external BOM

Fixed current limiting (typically 0.75 A to 1.25 A trip range) and over-temperature shutdown eliminate the need for a separate PTC fuse or current-sense resistor. The open-drain Status Flag output asserts low when the switch is in current-limit or thermal-shutdown — a direct interrupt to the system controller. UVLO holds the switch off until the input bus reaches about 2.4 V, preventing brownout glitches.

The 8-SOIC package ships in Tape & Reel (TR), compatible with standard pick-and-place lines.

TPS2051DR
[ALLOC] verified
Quote