Skip to main content
Texas Instruments TPS1100D
Texas Instruments

TPS1100D P-Channel MOSFET, 15V 1.6A, 8-SOIC

MPNTPS1100D
End of Life

Texas Instruments TPS1100D, P-Channel MOSFET, 15V Vdss, 1.6A continuous drain, 180mOhm Rds(on), 8-SOIC surface mount, -40°C to 150°C junction.

$1.79Ref. price · indicative, final on quote
TPS1100D datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TPS1100D Technical Specifications
ParameterValue
FET typeP-Channel
Mounting typeSurface Mount
Drain to source voltage15 V
Drive voltage (Max rds on, min rds on)2.7V, 10V
Current - continuous drain (Id) @ 25°C1.6A (Ta)
Power dissipation791mW (Ta)
Operating temperature-40°C ~ 150°C (TJ)
PackageTube
Vgs+2V, -15V
TechnologyMOSFET (Metal Oxide)
Case8-SOIC (0.154\", 3.90mm Width)
Vgs(th) (Max) @ id1.5V @ 250µA
Rds on (Max) @ id, vgs180mOhm @ 1.5A, 10V
Gate charge (Qg) (Max) @ vgs5.45 nC @ 10 V

Product details

P-channel switch for low-side or load-switch duty

Gate threshold voltage is 1.5 V max at 250 µA, so logic-level drive from a 2.7 V rail turns it on fully. Gate charge is 5.45 nC at 10 V — light enough for a GPIO pin to switch it without a dedicated driver in many low-frequency load-switch or power-rail sequencing roles.

Package and storage note

If your pick-and-place line expects reels, plan to transfer to carrier tape or hand-place for prototype runs. The 8-SOIC body (0.154" wide, 3.90 mm) is a standard footprint — no surprises for the board layout.

Lifecycle and sourcing

The TPS1100D carries an Active lifecycle status with ROHS3 compliance. No end-of-life notice on record.

Frequently asked questions

What is the TPS1100D equivalent P-channel MOSFET?

No official cross-reference or second-source alternate is listed for the TPS1100D in the available records. For a pin-compatible alternative, compare the 8-SOIC footprint, 15 V Vdss, 1.6 A Id, and 180 mOhm Rds(on) against other P-channel parts in the same package — but no direct equivalent is confirmed here.

What is TPS1100D's listed FET type?

The TPS1100D is a P-Channel MOSFET, using standard silicon gate (Metal Oxide) technology.