Rail-to-rail steering array for HDMI port protection
The 40W peak pulse power rating (8/20 µs waveform) absorbs typical system-level ESD strikes.
Voltage thresholds and clamping behaviour
With a 5.5V maximum reverse standoff voltage and a 6V minimum breakdown, the array stays transparent during normal HDMI signalling (3.3 V common-mode) and only conducts when a transient exceeds the rail. The 14V clamping voltage at 2.5 A peak pulse current (8/20 µs) keeps the protected IC's input below typical absolute-maximum ratings for HDMI receivers. Power line protection is integrated — the rail-to-rail architecture references both supply and ground, so the array can shunt positive and negative transients without external biasing diodes.
Housed in a 14-USON package measuring 3.5 mm × 1.35 mm, the TPD6E05U06RVZR fits directly under an HDMI connector or near the SoC port.
