Skip to main content
Texas Instruments TMS320F28022PTS — Microcontrollers & Processors (MCU / MPU / DSP)

TI TMS320F28022PTS C2000 C28x Piccolo MCU, 50 MHz, 48-LQFP

MPNTMS320F28022PTS
Active

Texas Instruments C2000 C28x Piccolo series, 32-Bit Single-Core MCU, C28x core, 50MHz, 32KB (16K x 16) FLASH, 6K x 16 RAM, 1.71V ~ 1.995V, 48-LQFP, -40°C~125°C.

$5.4590Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TMS320F28022PTS specifications
ParameterValue
SeriesC2000™ C28x Piccolo™
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.71V ~ 1.995V
Operating temperature-40°C~125°C(TA)
Speed50MHz
PackageTray
RAM size6K x 16
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityI²C, SCI, SPI, UART/USART
Number of i (O)22
Core processorC28x
Case48-LQFP
Data convertersA/D 13x12b
Program memory size32KB (16K x 16)

Product details

C2000 Piccolo for real-time control

The TMS320F28022PTS is a 32-bit C28x Piccolo microcontroller with a 50 MHz core, 13-channel 12-bit ADC, 32 KB Flash, and 6K x 16 RAM.

This part is end-of-life (EOL hot). No official successor is listed in the available records. Procurement should plan for last-time-buy or surplus-channel sourcing.

Frequently asked questions

What is the operating voltage of TMS320F28022PTS?

The core supply range is 1.71 V to 1.995 V. I/O pins are 3.3 V tolerant.

What is the TMS320F28022PTS equivalent?

No pin-compatible direct replacement is listed in the available records. For a functional equivalent within the C2000 family, consider a higher-density Piccolo or Delfino part, but verify pinout and peripheral set against your design.

Can TMS320F28022PTS be used for motor control?

Yes. The 50 MHz C28x core, PWM peripherals, and 13-channel 12-bit ADC are well-suited for field-oriented control of AC induction, BLDC, and PMSM motors.

How to program TMS320F28022PTS?

Programming is done via the JTAG or serial-wire debug interface using TI's Code Composer Studio or third-party tools. The 32 KB on-chip Flash stores the application firmware.