That FPU handles sensor fusion or PID math without software emulation, shaving microseconds off the control loop. The 128 KB Flash and 32K x 8 RAM are sized for a mid-complexity firmware image — enough for a CANopen node with a USB service port, but not a full HMI stack. The 49 I/O lines route through a 64-LQFP package (10x10 mm), which keeps the board footprint compact for industrial sensor heads or motor-drive interface cards. On-chip peripherals include CAN, USB OTG, I²C, SPI, UART, and a 12-bit ADC with 12 channels — enough to read a resolver or thermocouple array without external muxing.
Lifecycle: EOL hot — plan the last-time-buy now
Supply voltage and temperature grade — industrial environment fit
The TM4C1236E6PMI operates from 1.08 V to 3.63 V supply.
Connectivity and peripherals — what the bus supports
The CAN 2.0B interface and USB OTG (with on-chip PHY) support CAN-to-USB gateway applications. SSI and Microwire tie directly to SPI-based ADCs or external FRAM without glue logic.