What this dual op-amp brings to a 40 V rail
The TLV9362IDR: Its headline specs — 10.6 MHz gain-bandwidth product and 25 V/µs slew rate — place it in the mid-speed class for signal conditioning on industrial and automotive rails. The rail-to-rail output stage swings within millivolts of each supply, useful when driving an ADC or a low-voltage load directly from a 40 V bus. Input bias current sits at 10 pA typical, so high-impedance sensor interfaces don't leak away the signal. Output drive is rated 60 mA per channel, enough to swing a small relay or a capacitive load without an external buffer.
Supply range and temperature — the fit check
That 4.5 V floor means it works cleanly off a 5 V rail with margin for drop, and the 40 V ceiling covers 24 V industrial buses and 36 V automotive transient lines without an external clamp. No derating headache at 105°C ambient; it's rated straight to 125°C junction.
TI lists the TLV9362IDR as Active.