Skip to main content
Log in
Texas Instruments TLV9102SIDGSR — Analog & Data Acquisition

TI TLV9102SIDGSR Dual Op-Amp, 1.1 MHz GBW, 4.5 V/µs

MPNTLV9102SIDGSR
End of Life

Texas Instruments TLV9102SIDGSR, dual general-purpose op-amp, 1.1 MHz gain bandwidth, 4.5 V/µs slew rate, rail-to-rail output, 115 µA supply per channel, 2.7 V to 16 V supply, -40°C to 125°C, 10-VSSOP package.

$1.23Ref. price · indicative, final on quote
Texas Instruments TLV9102SIDGSR datasheet (PDF)
Packaging10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV9102SIDGSR specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset300 µV
Voltage - supply span2.7 V
Current - supply115µA (x2 Channels)
Current - input bias10 pA
Current - output (Channel)80 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product1.1 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate4.5V/µs
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)
Number of circuits2

Product details

Dual op-amp for signal conditioning and sensor front-ends

The Texas Instruments TLV9102SIDGSR is a dual general-purpose operational amplifier with rail-to-rail output, a gain bandwidth product of 1.1 MHz, and a slew rate of 4.5 V/µs. Each channel draws 115 µA supply current, making it suitable for battery-powered or loop-powered sensor interfaces, industrial signal conditioning, and multi-channel data acquisition. The supply range spans 2.7 V to 16 V, and the operating temperature covers -40°C to 125°C, so it fits industrial control cabinets, outdoor telecom, and engine-bay electronics. The 10-VSSOP package saves board area on dense mixed-signal PCBs.

Rail-to-rail output and 1.1 MHz GBW

Rail-to-rail output swing means the amplifier can drive its output close to the supply rails. The 1.1 MHz gain bandwidth covers audio-frequency filtering. The 4.5 V/µs slew rate handles fast edges.

Frequently asked questions

Is TLV9102SIDGSR rail-to-rail output?

Yes, the TLV9102SIDGSR features rail-to-rail output, allowing the output to swing close to the supply rails for maximum dynamic range in single-supply designs.

What are equivalent or alternative parts to TLV9102SIDGSR?

Within the same family, the TLV9351IDCKR is a single-channel op-amp with 3.5 MHz GBW and 20 V/µs slew rate, and the TLV9362IDDFR is a dual-channel op-amp with 10.6 MHz GBW and 25 V/µs slew rate. Both are rail-to-rail output and share the same 10 pA input bias current and -40°C to 125°C temperature range. The TLV9102SIDGSR is the lower-power, lower-speed option for applications where 1.1 MHz GBW and 115 µA per channel are sufficient.