Skip to main content
Texas Instruments TLV9102IPWR — Logic ICs
Texas Instruments

Texas Instruments TLV9102IPWR Dual Op-Amp, 1.1 MHz

MPNTLV9102IPWR
End of Life

Texas Instruments TLV9102IPWR, dual general-purpose op-amp, 1.1 MHz gain bandwidth, 4.5V/µs slew rate, rail-to-rail output, 2.7V to 16V supply, 115µA per channel, -40°C to 125°C, 8-TSSOP package.

$1.12Ref. price · indicative, final on quote
TLV9102IPWR datasheet
Packaging8-TSSOP (0.173", 4.40mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TLV9102IPWR Technical Specifications
ParameterValue
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset300 µV
Voltage - supply span2.7 V
Current - supply115µA (x2 Channels)
Current - input bias10 pA
Current - output (Channel)80 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product1.1 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate4.5V/µs
Case8-TSSOP (0.173\", 4.40mm Width)
Number of circuits2

Product details

Active dual op-amp for industrial and battery-powered signal chains

The TLV9102IPWR: The 1.1 MHz gain-bandwidth product and 4.5 V/µs slew rate cover audio-frequency conditioning, ADC drivers, and active filtering without the overhead of a wider-bandwidth part.

115 µA per channel — where the power goes

At 115 µA per channel (both channels active), the TLV9102IPWR sits in the micropower tier of general-purpose op-amps. The 80 mA output current per channel is generous for this quiescent level, letting it drive moderate loads like a reference buffer or a small relay coil without a separate driver stage.

Supply range and output swing

The 2.7 V minimum supply lets the part run from a single lithium cell; the 16 V maximum covers industrial rails. Rail-to-rail output swing means the output can reach within millivolts of either supply rail, preserving dynamic range in low-voltage systems.

Frequently asked questions

What is the quiescent current of TLV9102IPWR per channel?

The supply current is 115 µA per channel, so the dual-channel device draws 230 µA typical total quiescent current.

What are the alternatives to TLV9102IPWR?

For a higher-speed single-channel option, the TLV9351IDCKR offers 3.5 MHz GBW and 20 V/µs slew rate in a similar supply range. For a dual-channel with higher bandwidth, the TLV9362IDDFR provides 10.6 MHz GBW and 25 V/µs slew rate. Both are from the same TI family and share the rail-to-rail output and low input bias current characteristics.