Skip to main content
Log in
Texas Instruments TLV9002IDSGT — Analog & Data Acquisition

TLV9002IDSGT dual op-amp, 1 MHz GBW, rail-to-rail, 1.8-5.5 V

MPNTLV9002IDSGT
Active

Texas Instruments TLV9002 dual general-purpose op-amp, 1 MHz gain-bandwidth product, 2 V/µs slew rate, rail-to-rail output, 1.8 V to 5.5 V supply, 60 µA supply current per channel, -40°C to 125°C, 8-WSON (2x2 mm) package.

$1.4300Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TLV9002IDSGT specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset400 µV
Voltage - supply span5.5 V
Current - supply60µA
Current - input bias5 pA
Current - output (Channel)40 mA
Operating temperature-40°C~125°C(TA)
Gain bandwidth product1 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate2V/µs
Case8-WFDFN Exposed Pad
Number of circuits2

Product details

1 MHz gain-bandwidth — where it fits the signal chain

The TLV9002IDSGT is a dual general-purpose CMOS op-amp from Texas Instruments, built for low-power signal conditioning in battery-operated or space-constrained designs.

No extra regulator needed for the op-amp supply — that simplifies the power tree and saves a component on the BOM.

60 µA supply current — the battery-life decision

At 60 µA per channel quiescent current, the TLV9002 draws 120 µA total for both amplifiers. That is the difference between a sensor node that runs for months on a coin cell and one that needs a battery swap every few weeks.

8-WSON (2x2 mm) — rework and footprint notes

The 8-WSON package measures 2x2 mm with an exposed thermal pad. For rework: the small pad mass heats fast under hot air, but the part is easy to align if the PCB has a silkscreen outline.

Frequently asked questions

What is the gain-bandwidth product of TLV9002IDSGT?

The gain-bandwidth product is 1 MHz, suitable for signal frequencies up to a few tens of kilohertz depending on the closed-loop gain.

Is TLV9002IDSGT RoHS compliant?

The part is listed with a standard Tape & Reel and Cut Tape package option; Texas Instruments typically marks RoHS compliance on the reel label. Confirm the specific date-code lot at order time.