Texas Instruments TLV9002IDR, dual general-purpose op-amp, 1 MHz gain bandwidth, 2V/µs slew rate, rail-to-rail output, 60 µA supply per channel, 1.8 V to 5.5 V supply, -40°C to 125°C, 8-SOIC package.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 400 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 60µA |
| Current - input bias | 5 pA |
| Current - output (Channel) | 40 mA |
| Operating temperature | -40°C~125°C(TA) |
| Gain bandwidth product | 1 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 2V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 2 |
With a 1 MHz gain-bandwidth product and 2V/µs slew rate, this op-amp handles audio-band signals and sensor outputs up to roughly 100 kHz before the gain starts to roll off. The 5 pA input bias current suits high-impedance sources like photodiodes or pH probes.
It is suitable for both prototype builds and volume production without a near-term end-of-life concern.
The TLV9002IDR has a slew rate of 2V/µs. This is the rate at which the output voltage can change; for a 1 V peak-to-peak sine wave, the maximum frequency before slew-rate limiting is about 318 kHz.