Texas Instruments TLV6742SIRUGR, dual CMOS rail-to-rail output op-amp, 10 MHz gain-bandwidth, 4.5 V/µs slew rate, 990 µA per channel supply, 1.7 V to 5.5 V supply range, -40°C to 125°C, 10-X2QFN package.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | CMOS |
| Voltage - input offset | 150 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 990µA (x2 Channels) |
| Current - input bias | 3 pA |
| Current - output (Channel) | 68 mA |
| Operating temperature | -40°C ~ 125°C (TA) |
| Gain bandwidth product | 10 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 4.5V/µs |
| Case | 10-XFQFN |
| Number of circuits | 2 |
Surface-mount assembly is standard; the small footprint means the bypass capacitor needs to sit close to the supply pins to keep the rail clean at 10 MHz.
The TLV6742SIRUGR has a slew rate of 4.5 V/µs, which is sufficient for amplifying audio-band signals or conditioning sensor outputs up to a few hundred kilohertz without significant slew-induced distortion.
No. The TLV6742SIRUGR comes in a 10-X2QFN package, while the TLV9362IDDFR is in an 8-pin SOT-23 package. The pin counts and footprints differ, so a board redesign is required to swap between the two.