Texas Instruments TLV6001UIDBVT, general-purpose op-amp, single circuit, 1 MHz gain bandwidth, 0.5 V/µs slew rate, rail-to-rail output, 75 µA supply, 1.8 V to 5.5 V supply, SOT-23-5 package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting type | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 750 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 75µA |
| Current - input bias | 1 pA |
| Current - output (Channel) | 15 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 1 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.5V/µs |
| Case | SC-74A, SOT-753 |
| Number of circuits | 1 |
The supply span runs from 1.8 V to 5.5 V. Input bias current is 1 pA typical.
The part ships in SOT-753 (SOT-23-5) on Tape & Reel or Cut Tape.
The TLV6001UIDBVT and TLV6001IDBVT share the same SOT-23-5 footprint and electrical ratings — the suffix difference is packaging and reel quantity. The TLV6001UIDBVT is a drop-in replacement for the TLV6001IDBVT on the same board layout.
The SOT-23-5 pinout (standard for TI single op-amps) is: pin 1 = OUT, pin 2 = V-, pin 3 = IN+, pin 4 = IN-, pin 5 = V+. Verify against the datasheet before layout.
The TLV9351IDCKR is a faster sibling (3.5 MHz GBW, 20 V/µs slew rate) in the same SOT-23-5 footprint, but it draws 600 µA supply current — eight times the quiescent draw of the TLV6001UIDBVT. For low-power designs, the TLV6001UIDBVT is the correct choice; the TLV9351IDCKR fits when speed matters more than battery life.